A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
Text excerpt from page 7 (click to view)
De-icer control
Do not operate dehumidifier at temperatures below 18.3% (65°F). The coils may become iced over and unit will not operate properly. Your Whirlpool dehumidifier is equipped with a feature to help you get the most comfort from your new appliance by permitting it to operate down to 18.3% (65°F). If your dehumidifier runs when room temperature and humidity conditions are low, frost can form on its evaporator coil. This interferes with proper operation. The De-icer Control senses frost build-up on the evaporator coil and automatically shuts off the compressor. The fan continues to run, drawing air across the coil and melting the frost. When the coil is defrosted, the compressor is automatically restarted, and dehumidifying is resumed.
Water level adjustment
Setting the water level adjustment
control switch
Normal fill
Screw
MaxirAm
fill
The Water Level Adjustment can be set in two positions to turn off the unit automatically when the pan is full. This prevents the danger of overflow. Pan must be in proper position for Water Level Control Switch to work. l NORMAL FILL-set Water Level Adjustment to the indentation on the left side. The water pan and water will weigh approximately 7.2 kg (16 Ibs.) and water pan will be l/2 full. l MAXIMUM FILL-set Water Level Adjustment to the raised area on the right side. The water pan and water will weigh approximately 10.8 kg (24 Ibs.) and water pan will be 3/4 full. The Water Level Control Switch will automatically turn off the dehumidifier at the fill level you selected when pan is properly placed. Loosen the screw to move the Water Level Adjustment. Retighten screw when adjusted to desired setting.
